Vueline Opening Roof

Vueline opening roof, the latest addition to the CW Systems product range, is the ultimate complement to any outdoor area, Perfect for increasing usability of your BBQ area or keeping your café customers covered. Available with rain sensors and remote.

005_med

007_med

002_med_hr

001_med

Technical Details
Blade Options

standardblade_med_hr

VUELINE STANDARD OPEN ROOF BLADE BLADE
* Sleek air foil profile

optionalblade_med_hr

OPTIONAL SOLARIS OPENING ROOF

* Increased Pan
* Flat Profile

TYPICAL INSTALLATION

installationdetail1_med

installationdetail2_med

TYPICAL FLASHING DETAIL (DETAIL A)

flashingdetail_med

Technical Points

Spans
Recommended maximum span is 3.4m (greater spans can be achieved safely but weathering performance may be impaired.

Please contact CW Systems for advice, or us the Solaris profile)

Optimum opening size

Optimum opeing size equals 175mm x number of blades + 65mm

Flashings

Flashings are normally required when mounting to a timber frame.

Good quality sealants are acceptable if mounting to steel or aluminium.

Down Pipes

Downpipes are normally taken from the bottom of the gutter at a corner,

however alternative solutions can be found for those complex situations.

Gutter Joints

Gutter corners are normally jointed with a separate welded corner unit to minimise

the risk of leaks, however it is advisable to mitre and seal the corners when using and anodised finish to ensure continuity of colour.

Supporting Structure

Engineering supporting structure is also available if required. Please contact CW Systems Pty Ltd.

Finishes

The full range of powder coat and anodising finishes are available.

Contact CW Systems Pty Ltd for a colour chart.

ELECTRICAL DETAILS

The CW Systems opening roof system comes with the full range of electronic operating options.

Up to four different areas of louvres can be individually operated using a wall switch or a remote.
http://www.cwsystems.com.au/images/openingroof/kppushbutton.jpg

Rain and wind sensors can also be added into the circuit to operate the roof automatically.

KP Pushbutton

This component is required if operating two or more areas seperately or if using a remote.
http://www.cwsystems.com.au/images/openingroof/rcremotecontrol.jpg

Must be used in conjuction with the CRM control unit.

kppushbutton_med_hr

RC Remote Control

Must be used in conjuction with the CRM

control unit and the KP Push button.

rcremotecontrol_med_hr

Push Button

Designed for operating one area of louvres

Use in conjuction with 24V DC power supply.

pushbutton_med_hr

RS Rain Sensor

Ideal for the Australian climate!

Must be used in conjuction with the CRM control unit!

rsrainsensor_med_hr

CRM Control Unit

Must be used if the KP Pushbutton,

RC Remote Control or RS Rain sensor is required

crmcontrolunit_med_hr